GB IDAN User Manual page 45

10
install load leg, see page 35.
11
check that the Recline angle remained in the
appropriate range for the child's weight. if not,
remove Base, adjust recline angle and reinstall.
see page 37.
make sure that vehicle belt buckle and hardware
do not interfere with correct installation of the
Base, or with the connection of the infant carrier
to the Base.
to remove base, open belt tensioning plate and
unfasten buckle from the vehicle seat.
10
11
Use the
fIrSt hole
that will lock
the Load
Leg Foot
firmly against
vehicle floor
45