GB IDAN User Manual page 69

6. Unsnap the two snaps creating the
harness slot.
7. Unsnap the two black snaps holding the
canopy fabric and push canopy forward.
8. Unsnap the three gray snaps from the top
of the plastic shell.
9. Unsnap two silver dual action snaps- same
as for canopy straps.
10. pull forward and over the side wings, unsnap
2 gray snaps and 2 silver snaps connecting
to leg support cover, as well as 2 gray snaps
connecting to plastic shell and remove the
Backrest cover.
11. Unsnap opening for hip belt and lift fabric
over the side. finally thread crotch Buckle
through the crotch Buckle pad.
do not damage, remove or dispose of any
eps foam.
installing the seat Cover
note! ensure to not twist or mix up the
shoulder belts.
to reinstall the seat cover, reverse the steps on
page 69-68.
Care and CleanInG
69