10.5.3 Voltage Supply For The Control And For The Extension Modules - Bosch rexroth IndraControl XFE 01.1 Operating Manual
Extension modules profibus, rt-ethernet, sercos, can
Hide thumbs
Also See for rexroth IndraControl XFE 01.1:
- Operating instructions manual (44 pages) ,
- Operating instructions manual (36 pages)
Table of Contents
Advertisement
IndraControl XFE 01.1
2
1
FE
24 V
GND
Fig. 12: Not allowed voltage supply
① 24 V voltage supply
② Top-hat rail
③ Extension module
④ XM2x control
⑤ S20 Module
10.5.3 Voltage supply for the control and for the extension modules
The control is supplied via the XD1 plug.
Connect the power connector with cables with a conductor cross-section of AWG 16
(1.5 mm
).
2
Observe the color-coding of the plugs.
Only the "XA-CN01" power connector is permitted to connect the 24 V supply voltage (see
⮫ Chapter 5.1 "Power connectors, 24 V" on page
R911345570, Edition 06
3
3
4
5
9).
23 / 36
Electric installation
5
Bosch Rexroth AG
Advertisement
Table of Contents
