Ce Marking; Declaration Of Conformity; Ul/Csa Certified - Bosch rexroth IndraControl XFE 01.1 Operating Manual

IndraControl XFE 01.1
Standard
IEC 60529
IEC 61010-2-201
UL 61010-2-201
8.3

CE marking

8.3.1

Declaration of conformity

The electronic products described in the present operating instructions comply with the requirements
and the target of the following EU directive and with the following harmonized European standards:
EMC directive 2014/30/EU
The electronic products described in the present operating instructions are intended for use in
industrial environments and comply with the following requirements:
Table 7: Standards for electromagnetic compatibility (EMC)
Standard Title
DIN EN 61000-6-4 Electromagnetic compatibility (EMC)
Part 6-4: Generic standards – Emission standard for indus-
trial environments
DIN EN 61000-6-2 Electromagnetic compatibility (EMC)
Part 6-2: Generic standards – Immunity for industrial envi-
ronments
Loss of CE conformity due to modifications at the device.
CE marking applies only to the device upon delivery. After modifying the device, verify the CE
conformity.
8.4

UL/CSA certified

The devices are certified according to
•
UL 61010-1 – Edition 3
UL 61010-2-201 – Edition 1 (Industrial Control Equipment)
•
CSA C22.2 NO. 61010-1-12 UPDATE – Edition 3
CSA C22.2 NO. 61010-2-201:14 – Edition 1
However, there can be combinations or extension stages with a limited or missing certification. Thus,
verify the registration according to the UL marking on the device.
Loss of UL/CSA conformity due to modifications at the device.
UL and CSA marking applies only to the device upon delivery. After modifying the device, verify
the UL and the CSA conformity.
R911345570, Edition 06
Meaning
Degrees of protection provided by enclosures (IP code)
Safety requirements for electrical equipment for measure-
ment, control and laboratory use
Safety requirements for electrical equipment for measure-
ment, control and laboratory use
13 / 36
UL/CSA certified
Edition
2014
2014
2014
Edition
September 2011
March 2006
Bosch Rexroth AG