Voltage Supply For The Control And For The Extension Modules - Bosch Rexroth IndraControl XFE 01.1 Series Operating Instructions Manual

Extension Modules Profibus, RT-
Ethernet, Sercos, CAN
2
1
FE
24 V
GND
①
24 V voltage supply
②
Top-hat rail
③
Extension module
Fig. 10-8: Not allowed voltage supply

10.5.2 Voltage supply for the control and for the extension modules

The control is supplied via the XD1 plug.
Connect the power connector with cables with a conductor cross-
section of AWG 16 (1.5 mm
Observe the color-coding of the plugs.
Only the "XA-CN01" power connector is permitted to connect the 24
V supply voltage (see
DOK-CONTRL -XFE**EXTMOD-IT04-EN-P
Mounting, demounting and electric installationI
3 3
chapter 5.1 "Connector 24 V" on page
4
④
XM2x control
⑤
S20 Module
2
).
Bosch Rexroth AG
5 5
6).
23/37