20/31
Mounting, demounting and electric installationI
2
1
FE
24 V
GND
①
24 V voltage supply
②
Top-hat rail
③
Extension module
Fig. 10-8: Not allowed voltage supply
10.5.2 Voltage supply for the control and for the extension modules
The control is supplied via the XD1 plug.
Connect the power connector with cables with a conductor cross-
section of AWG 16 (1.5 mm
Observe the color-coding of the plugs.
Only the "XA-CN01" power connector is permitted to connect the 24
V supply voltage (see
Bosch Rexroth AG R911345570_Edition 05
3
3
chapter 5.1 "Connector 24 V" on page
IndraControl XFE 01.1 Extension Mod-
ules Profibus, RT-Ethernet, Sercos, CAN
4
④
XM2x control
⑤
S20 Module
2
).
5
5
6).