Leds On The Xd1 Plug - Bosch rexroth IndraControl XFE 01.1 Operating Manual

26 / 36

LEDs on the XD1 plug

LED Color
BF Red
Table 14: Sercos extension module
LED Color
S Orange
L Green
Table 15: CAN extension module
LED Color
PW Green
ERR Red
RUN Green
For the error displays of the LEDs, refer to
on page 27.
The LEDs are displayed as described after the control startup and after the initialization of the
extension modules!
12.3 LEDs on the XD1 plug
Fig. 15: LEDs on the XD1 plug
The following function is assigned to the LED on the XD1 plug:
Table 16: LED function on the XD1 plug
LED Color
PW Green
ON Green
U Green
L
Bosch Rexroth AG
Function
LED is permanently on: No connection
LED flashes: Slave diagnostics
Function
LED is cyclically on: Data is sent
LED is permanently on: Connection present
Function
LED is permanently on: CAN voltage present
LED displays the bus error acc. to the CANopen standard CiA 303 Part
3: Indicator Specification
LED displays the bus state acc. to the CANopen standard CiA 303 Part
3: Indicator Specification
⮫ Chapter 13.1 "Error messages of the status LEDs "
PW
UL
Function
Internal voltages are present
Internally programmed function blocks are loaded
24 V supply voltage connected and within the permitted range
ON
R911345570, Edition 06
IndraControl XFE 01.1