Avoiding Accidental Damage To Test Frame - Mecmesin MultiTest-x Startup Manual

Avoiding Accidental Damage to Test Frame

The MultiTest-x must be powered down when attaching/removing the cables.
Note: no cable should exceed 3 metres in length.
When installing/moving/re-installing the test frame, note that care must be taken to:
• turn off power before removing or attaching communication/XLC cable(s)
• observe lifting precautions given in section on 'Receiving and Unpacking'
in Appendix 2
• provide support at the base, as well as at the back of the shroud(s)
• avoid applying pressure to the adjustable limit stops or LCD display cover
• ensure that connectors which are not in use are covered at all times with
the shields provided
DECLARATION OF CONFORMITY: Please refer to the 'Literature & FAQs' section of
the Mecmesin website for a copy of the EC Declaration of Conformity relevant to
your machine.
IF IN DOUBT CONSULT YOUR LOCAL SUPPLIER TO ENSURE CONTINUED
SAFE USE
Mecmesin MultiTest-x Manual
16