Operator Training; Eye Protection And Protective Clothing - Mecmesin MultiTest-x Startup Manual

Operator Training

Each person who is to use the machine should be fully trained in the safe use of
motorised testing machines. Training can be arranged by contacting Mecmesin
Limited or an Authorised Agent.
The machine has the ability to generate forces large enough to cause
permanent damage to human limbs, if placed between the crosshead and
the base. Fingers, hands and other parts of the body should be kept away
from the moving crosshead and shroud opening. Note that, in the case of the
MultiTest 5-x, and twin-column test frames, the concertina dust covers conceal a
potential mechanical hazard and should not be tampered with, especially when the
machine is running.
An operating test stand should never be left unattended.
Always disconnect the machine from the mains power supply when not in use to
avoid inadvertent actuation of the machine by untrained personnel.

Eye Protection and Protective Clothing

Eye protection should always be used in the form of an approved pair of safety
spectacles. They should be replaced if they are scratched or damaged in any way.
They should be kept clean and clear to give maximum visibility to the user.
Extra bodily protection may be necessary if destructive testing or volatile failure of a
test piece is likely. A risk assessment should be carried out prior to using the test
frame to ensure that all necessary safety measures have been considered and
carried out.
Mecmesin MultiTest-x Manual
14