Machine Guarding; Continued Safe Use - Mecmesin MultiTest-x Startup Manual

Mecmesin MultiTest-x Manual

Machine Guarding

If, after the assessment, it is considered that machine guarding is needed, then
contact your local supplier who, through Mecmesin, can arrange the supply of a
suitable guard offering the required level of protection.

Continued Safe Use

Once the machine is installed it should provide a reliable long-term resource for
universal testing. If however the machine fails, or appears to behave in an unusual
manner, contact your local supplier for support. Do not continue to use the machine
until it has been checked and if necessary, repaired and returned to a safe working
condition. To ensure optimal safe performance, your MultiTest-x must be regularly
serviced, and the XLC calibrated by Mecmesin Limited or an Authorised
Agent.
If the machine is damaged in use, advise your local supplier and have the machine
repaired to a safe working condition. Do not use the machine until it is repaired.
Note: It may occasionally become necessary to clean the outside of your test stand.
This can be done by disconnecting it from the mains electricity supply, removing
loose debris with a soft brush, then wiping with a damp cloth. Under no
circumstances should organic solvents or any other cleaning fluid be used.
15