Table of Contents
Advertisement
Repeater – Installation and Programming Manual
The access codes could be changed only from level Installer - menu 2) General Settings - submenu 2.1)
Access codes. There are different restrictions on the panel functions in the relative access levels, which are
shown in the following table:
Mode/ Menu
ALARMS
FAULTS
DISABLED
TESTS
WARNINGS
Silence buzzer
Silence
Sounders
RESET
Evacuation
TEST
View History
Log
General
Settings:
• Access
codes
• Time/ Day
• Panel
settings
• Company
logo
Save
configuration
Restore
defaults
Software
revision
Network
Access level 1
*
Just for those cases, when the fire alarm signal is received from a device.
-
The operation modes and the menus are not supported for that access level
✓ -
The operation modes and the menus can be reviewed or are allowed for partial programming for that access level
Description
Viewing the Alarms Messages in the system.
Viewing the Faults Messages in the system.
Viewing the active disablements in the system.
Viewing the running tests in the system.
Viewing the Warnings Messages in the system.
Deactivating Internal Buzzer.
Deactivating the Sounders. During active fire alarms and
deactivated/ silenced sounders the LED next the button
is lighting up.
Resetting the panel without switching off the main and
backup power supplies
Activating Evacuation alarm signal; the sounders will
activate immediately overriding all introduced delays.
General test for operability of all LEDs and internal
buzzer.
Viewing the LOG file for all events; printing of all or
separate events; clear the log file.
General settings common for the panel.
Changing the code combinations for levels Maintenance
and Installer; enable/ disable the automatic exit from the
installer programming menus.
Setting the current time and date.
Changing the menu language, setting the backlight
brightness; entering disablements.
Enter company information for the main screen.
Saving the set system configuration.
Restoring the factory default settings.
Reviewing the current software revision.
Setting the redundant network parameters
Return to Access Level 1.
6 9
11
Access Level
1
2
3
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
-
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Advertisement
Table of Contents
