Table of Contents
Advertisement
Terminal
The relay outputs provide relays with potential free contacts (see characteristics in page 53).
The status of the relay contacts corresponds to the relay at
The relay contacts are not protected in any way, and therefore they must be installed
externally
as required in the
characteristics of such contacts. In the case of having inductive loads, and to extend the
working life of the relay contacts, it is recommended to use overvoltage protection (VDR for
AC and diodes for DC loads). In all cases a fuse or some kind of protection against short
circuits,
should always be provided
2.2.3
Remote reset input wiring
Description
6
Normally Open
5
Common
4
Normally Open
3
Common
application, taking into account the limitations of the
according to the needs of the intended load.
Relay
Relay 1
Relay 1
Relay 2
Relay 2
rest.
18
Advertisement
Table of Contents
