Associated Software Winsmeter Mx4; Usb Cable Connection And Drivers Installation - Tecfluid FLOMID Series Instruction Manual

13

ASSOCIATED SOFTWARE WINSMETER MX4

Most of the steps in the preceding paragraphs can be done by means of the device
associated software Winsmeter MX4, which allows working in a more comfortable and
intuitive way.
Such software can be downloaded from the "Downloads" section of the Tecfluid S.A.
website www.tecfluid.com/downloads
13.1

USB cable connection and drivers installation

Extract the files from the winsmeterMX4.zip to a new system folder.
Execute the Setup.exe file and follow the steps for the installation.
In order to connect the converter to a computer an USB cable is required. This cable is type A
at one end and type B at the other, and it is readily available on the market.
The ends of the cables can be seen in the picture.
The first step to do the connection is to open the rear cover of the electronic converter.
The USB connector is located below the right terminal strip.
44
USB