5
MOUNTING
5.1
Parallelism
The maximum parallelism error must be less than 0.5 mm (Lmax—Lmin ≤ 0.5 mm).
5.2
Gasket position
In the wafer mounted sensors, in order to avoid leakage of the liquid into the sensor, it is
necessary to ensure that the rubber gasket (A) of the figure is well centered, so that it
presses directly on the plastic liner.
The standard gasket material supplied is NBR. Other materials can be supplied on demand.
The sensors with connections different to wafer are supplied without gaskets..
12