Mounting; Pipe Adaptor Mounting - Tecfluid FLOMAT Series Instruction Manual

Sensor, converter

Hide thumbs Also See for FLOMAT Series:

Table of Contents

MOUNTING

5.1

The sensor is normally supplied mounted in its pipe adaptor. Before welding the adaptor to

the pipe, the sensor must be removed to avoid irreparable damage due to excessive

temperatures.

There are two basic types of pipe adaptors: with threaded or with ﬂanged connection.

For the smallest pipe diameters (DN40, 50 & 65) the pipe adaptor is supplied welded to a

short length of pipe with a "T" form. For this type just couple it to the pipe by welding or

gluing in the case of PVC, PP, PE or other plastics.

For DN80 and bigger, there are three lengths for each of the two types of ﬁttings.

The process of putting the pipe adaptor in should be done accurately. The distance (H) (see

drawings on next page) which is what the pipe adaptor should protrude above the surface of

the pipe is important.

Table of Contents

Flomat-fx Mx4