External Component Replacement
Nozzle Strap with Clip Replacement
8.7
Requirements:
WT Nozzle Strap/Clip Kit
•
WARNING:
Disconnect the warming unit's power cord from the AC power source before
performing this procedure.
To replace the nozzle strap with clip:
Lift the nozzle off the hook on the side of the warming unit.
1.
If the current nozzle strap is still present, slide it down the hose and over the
2.
nozzle, stretching the strap as necessary to remove it.
Slide the replacement nozzle strap over the nozzle and onto the hose, positioning
3.
it as desired.
8-10
Figure 8-8. Nozzle Strap with Clip
(page
A-2)
Service Manual