Draining Water From The Air Reservoir - PRONAR PT512 Operator's Manual

Pronar PT512
Remove the sliding lock (1) – figure (5.6).
The filter element and body should be carefully washed out and blown through
with a compressed air. Assembly should be done in reverse sequence.
Clean the air filter (filters):
5.3.4

DRAINING WATER FROM THE AIR RESERVOIR

FIGURE 5.8 Draining water from the air reservoir
(1) water drain valve , (2) air reservoir
Reduction of pressure may be achieved by pressing the head of the
pneumatic connector until the resistance is felt.
Hold the filter cover (2) with other hand. After removing sliding lock,
the cover is pushed off by the spring in the filter housing.
• every 3 months of use.
5.18
CHAPTER 5