Trouble Shooting Tips | Frequently Asked Questions - ADJ Magnetic Dance MDF2-9SYS User Manual

One or more panels do not illuminate:
1. Check if panels are correctly installed and make sure none of the magnets are missing or mis-
aligned.
2. Check if the power supply(s) have AC power and are turned ON.
3. Locate the circuit breaker that the AC outlet the power supply(s) is connected to and confirm it
has not been tripped.
4. Check if the power cord from the power supply(s) is damaged or cut.
5. If none of these solutions work, please contact ADJ Customer Service.
One or more panels do not respond to DMX:
1. Check if panels are correctly installed and make sure none of the magnets are missing or mis-
aligned.
2. Check all DMX cables are connected to the correct input and output connectors.
3. Check if any of the DMX cables are damaged or cut.
One or more panels do not respond sound:
1. Quiet or high-pitched sounds will not activate the panels.
2. Confirm panels are all in CH10 DMX Mode and DMX Channel 9 value is set to 211-255.
Is there a fuse that can be replaced on the panel?
No. The panels do not have a replaceable fuse. However, there is a replaceable fuse located on the
Power Supply(s). If the fuse is intact and the system still does not operate, please contact ADJ cus-
tomer service.
What is the maximum number of panels that can be linked together?
The maximum number of linkable panels is limited by the total number of panels supported by the
power supply used. The system comes with a power supply which can support up to 9 total panels
max. If using more panels, a larger and/or multiple power supply(s) is required. See the Optional
Accessories section of this manual for details on power supplies to accommodate larger setups.
Are replacement end pieces and corners available for purchase?
Yes. Please visit www.adj.com
TROUBLE SHOOTING TIPS
FREQUENTLY ASKED QUESTIONS
for additional/replacement parts and accessories.
28