Trouble Shooting I Cleaning - ADJ 1226100374 User Instructions

Vizi Wash Z37
With this feature you can connect the fixtures to one another using the power cable input and
output sockets.
NOTE: USE CAUTION WHEN POWER LINKING OTHER FIXTURES AS THE POWER
CONSUMPTION OF OTHER MODEL FIXTURES MAY EXCEED THE MAX POWER OUTPUT ON
THIS FIXTURE! CHECK SILK SCREEN FOR MAX AMPS.
Vizi Wash Z37
Unplug the unit from any power source it may be connected to. Once the power has been disconnected,
use a phillips head screw driver to unscrew the fuse holder located next to the powerCON input.
Remove the bad fuse and replace with a new one, and screw the fuse holder back in.
Vizi Wash Z37
Listed below are a few common problems the user may encounter, with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is "hot"; on
some other DMX devices pin 2 may be 'hot'). Also, check that all cables are connected to the right
connectors; it does matter which way the inputs and outputs are connected.
Vizi Wash Z37
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried
out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside casing.
2. Clean the external optics with glass cleaner and a soft cloth every 20 days.
3. Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue,
dust, dew).
ADJ Products, LLC - www.adj.com - Vizi Wash Z37 User Manual Page 50
Multiple Unit Power Linking
Fuse Replacement
Trouble Shooting
Cleaning