Table of Contents
Advertisement
TROUBLE SHOOTING
Listed below is a common problem the user may encounter, with a suggested solution.
Unit not responding to DMX:
Check that the DMX cables are connected and wired correctly (pin 3 is "hot"; on some other DMX
devices pin 2 may be "hot"). Also, check that all cables are connected to the correct connectors, as
the order in which the inputs and outputs are connected does affect the operation of the unit.
CLEANING
Due to fog residue, smoke, and dust, cleaning of the internal and external optical lenses must be
carried out periodically to optimize light output.
• Use normal glass cleaner and a soft cloth to wipe down the outside casing.
• Clean the external optics with glass cleaner and a soft cloth.
• Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog resi-
due, dust, dew).
21
Advertisement
Table of Contents
