Related Manuals for ADJ MOD TWIOO
Summary of Contents for ADJ MOD TWIOO
- Page 1 User Instructions A.D.J. Supply Europe B.V. Junostraat 2 6468 EW Kerkrade The Netherlands www.americandj.eu...
- Page 2 ©2018 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted.
-
Page 3: Table Of Contents
SYSTEM MENU ..................................15 OPERATING INSTRUCTIONS ..............................16 MASTER-SLAVE CONFIGURATION ............................18 SNOOT EFFECT ..................................19 ADJ UC IR/ AIRSTREAM IR CONTROL ............................ 19 DIMMER CURVE CHART ................................ 20 DIMENSIONAL DRAWING ..............................21 HOUSING CHANGE ................................22 FROST FILTER ..................................23 MULTIPLE UNIT POWER LINKING ............................ -
Page 4: Introduction
Do not return this unit to your dealer without first contacting customer support. Introduction: The ADJ MOD TW100 is a DMX intelligent, high powered LED par fixture. This fixture seven be used in a stand alone set up or connected in a Master/Slave set up. The MOD TW100 has seven operating modes: Sound Active mode, Auto Run mode, Color Change mode, Color Fade mode, CW/WW/Amber Dimmer mode, Static Color mode, and DMX controlled. -
Page 5: Safety Precautions
SAFETY PRECAUTIONS • To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture. • Do not spill water or other liquids into or on to your unit. • Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or break off the ground prong from the electrical cord. -
Page 6: Control Panel Layout
CONTROL PANEL LAYOUT LCD DISPLAY UP BUTTON MODE BUTTON DOWN BUTTON SET UP BUTTON DMX IN POWER IN DMX OUT POWER OUT A.D.J. Supply Europe B.V. – www.americandj.eu – MOD TW100 Instruction Manual Page 6... -
Page 7: Dmx Set Up
2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line. Using a cable terminator (ADJ part number Z-DMX/T) will decrease the possibilities of erratic behavior. - Page 8 DMX SET UP (continued) 5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX-512 data cables for DATA transmission in place of 3-pin. 5-pin DMX fixtures may be implemented in a 3-pin DMX line. When inserting standard 5-pin data cables in to a 3-pin line a cable adaptor must be used, these adaptors are readily available at most electric stores.
-
Page 9: Dmx Addressing
DMX ADDRESSING All fixtures should be given a DMX starting address when using a DMX controller, so the correct fixture responds to the correct control signal. This digital starting address is the channel number from which the fixture starts to “listen” to the digital control signal sent out from the DMX controller. The assignment of this starting DMX address is achieved by setting the correct DMX address on the digital control display on the fixture. -
Page 10: Channel Mode
3 CHANNEL MODE Channel Value Function COOL WHITE 0 - 255 0% - 100% WARM WHITE 0 - 255 0% - 100% AMBER 0 - 255 0% - 100% 4 CHANNEL MODE Channel Value Function COOL WHITE 0 - 255 0% - 100% WARM WHITE 0 - 255... - Page 11 8 CHANNEL MODE (continued) Channel Value Function STROBING 0 - 31 LED OFF 32 - 63 LED ON 64 - 95 STROBING SLOW - FAST 96 - 127 LED ON 128 - 159 PULSE STROBING SLOW - FAST 160 - 191 LED ON 192 - 223 RANDOM STROBING SLOW - FAST...
-
Page 12: Channel Mode
9 CHANNEL MODE Channel Value Function COOL WHITE 0 - 255 0% - 100% WARM WHITE 0 - 255 0% - 100% AMBER 0 - 255 0% - 100% STROBING 0 - 31 LED OFF 32 - 63 LED ON 64 - 95 STROBING SLOW - FAST 96 - 127... - Page 13 9 CHANNEL MODE (continued) Channel Value Function PROGRAM SPEED/SOUND SENSITIVITY 0 - 255 PROGRAM SPEED SLOW - FAST 0 - 255 SOUND SENSITIVITY LEAST - MOST SENSITIVE DIMMER CURVES 0 - 20 STANDARD 21 - 40 STAGE 41 - 60 61 - 80 ARCHITECTURAL 81 - 100...
-
Page 14: Color Macro Chart
COLOR MACRO CHART Color No. DMX VALUE WW/CW/A COLOR INTENSITY Color 1 (off) Color 2 Color 3 8-15 Color 4 16-23 Color 5 24-31 Color 6 32-39 Color 7 40-47 Color 8 48-55 Color 9 56-63 Color 10 64-71 Color 11 72-79 Color 12 80-87... -
Page 15: System Menu
SYSTEM MENU MENU DESCRIPTION DMX MODE Set the DMX starting address ADDR:001~512 DMX MODE Set the unit DMX channels CHAN:3/4/5/8/9 DMX MODE NO:BLACK When DMX signal is lost or interrupted, the unit will default to BLACKOUT option. It will switch all LED’s off DMX MODE NO:HOLD When DMX signal is lost or interrupted, the unit will default to HOLD option. -
Page 16: Operating Instructions
OPERATING INSTRUCTIONS The control panel will lock up after 5 seconds of inactivity. Press the MODE button for at least 5 seconds to unlock the control panel. LCD Backlight On/Off: To set the LCD backlight to turn off after 20 seconds, press the MODE button until “OPTION BLGT: XX” is displayed. - Page 17 OPERATING INSTRUCTIONS (continued) Cool White/Warm White/Amber Dimmer Mode: 1. Plug the fixture in and press the MODE button until “MANUAL” is displayed. Press the SET UP button to cycle through the CW/WW/Amber colors. 2. When “CW” is displayed you are in Cool White dimming mode. Use the UP and DOWN buttons to adjust intensity.
-
Page 18: Master-Slave Configuration
This function is used to activate and deactivate the infrared sensor. When this function is activated the unit can be controlled using the ADJ UC IR or Airstream IR app. Please see page 19 for remote controls and functions. 1. Plug the fixture in and press the MODE button until “OPTION” is displayed. -
Page 19: Snoot Effect
The UC IR infrared remote gives you control of various functions (See below). To control the fixture you must aim the remote at the front of the fixture and be no more than 30 feet away. To use the ADJ UC IR you must first activate the fixtures infrared sensor, to activate the sensor please see the instructions on page 18. -
Page 20: Dimmer Curve Chart
DIMMER CURVE CHART DIMMER 0 sec Fade Time 1 sec Fade Time Dimming Curve Ramp Effect Rise Time (ms) Down Time (ms) Rise Time (ms) Down Time (ms) Standard (default) Stage 1100 1540 1660 1180 1520 1860 1940 Architectural 1380 1730 2040 2120... -
Page 21: Dimensional Drawing
DIMENSIONAL DRAWING A.D.J. Supply Europe B.V. – www.americandj.eu – MOD TW100 Instruction Manual Page 21... -
Page 22: Housing Change
HOUSING CHANGE The MOD units housing is interchangeable. You can purchase the white housing kit through ADJ. Changing the housing is very simple process. Follow the instructions below to change the housing. For more help contact ADJ Customer Support. Start by unscrewing and removing Once the knobs and bracket have the bracket knobs. -
Page 23: Frost Filter
Remove the lens and install the filter inside the unit. Line up the thumb screw holes on the edges of filter with screw holes of the unit. Screw the thumb screws back into place securing the lens. For help contact ADJ Customer Support. filter... -
Page 24: Specifications
SPECIFICATIONS Model: MOD TW100 Voltage: 100V~240V/50~60Hz 7 x 15W 3-in-1 LED’s LEDs: Working Position: Any safe working position Power Draw: 105W Power Linking: 5 Fixtures Max. @ 120V 9 Fixtures Max. @ 240V Weight: 6 lbs./ 2.7 Kgs. 7.75” (L) x 5.48” (W) x 9.9” (H) Dimensions: 197 x 139.5 x 251.5 mm Colors... -
Page 25: Rohs - A Great Contribution To The Conservation Of Environment
ROHS - A great Contribution to the Conservation of Environment Dear Customer, The European Union has adopted a directive on the restriction / prohibition of the use of hazardous substances. This directive, referred to as ROHS, is a frequently discussed topic in the electronic industry. It restricts, among other things, six materials: Lead (Pb), Mercury (Hg), hexavalent chromium (CR VI), cadmium (Cd), polybrimated biphenyls as flame retardant (PBB), polybrominated diphenyl, also a flame retardant (PBDE). -
Page 26: Weee - Waste Of Electrical And Electronic Equipment
WEEE – Waste of Electrical and Electronic Equipment Every year thousands of tonnes of electronic components, which are harmful to the environment, end up at the waste disposals around the world. To ensure the best possible disposal or recovery of electronic components, the European Union has adopted the WEEE directive. -
Page 27: Notes
NOTES ADJ Products, LLC 6122 S. Eastern Ave. Los Angeles, CA 90040 USA Tel: 323-582-2650 / Fax: 323-725-6100 Web: www.adj.com / E-mail: info@americandj.com Follow Us On: A.D.J. Supply Europe B.V. Junostraat 2 6468 EW Kerkrade The Netherlands facebook.com/americandj Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99 twitter.com/americandj...