Table of Contents
Advertisement
Manual Color Mode: Used to manually control the tone of each individual color.
1. Press the MENU button to cycle through the available color options, which are displayed as
"X000" – "X255" where "X" represents the color (R, G, or B) and 000-255 represents the current
tone for that color. Press the ENTER button to select which color you would like to set.
2. Use the UP or DOWN button to set the color tone. Press the ENTER button to accept.
• R000-R255 = Manually set the Red color tone.
• G000-G255 = Manually set the Green color tone.
• B000-B255 = Manually set the Blue color tone.
Color Macro Mode: Used to select from a list of 32 pre-programmed color macros. See the Color
Macros section of this manual for detailed information.
1. Press the MENU button until "CoXX" is displayed, where "XX" is a number from 01-32 corre-
sponding to the assigned DMX value of the currently selected color macro. Press the ENTER but-
ton to configure the Color Macros Mode.
2. Use the UP and DOWN buttons to select the value of the desired color macro. Press the ENTER
button to accept.
Strobe Effect:
1. Press the MENU button until "SXXX" is displayed, where "XXX" is a value between 000 and 255.
Press the ENTER button to select the Strobe effect.
2. Use the UP or DOWN buttons to adjust your desired strobe effect between 000-255 then press
the ENTER button to select your desired setting.
Total Dimming Effect:
1. Press the MENU button until "TXXX" is displayed, where "XXX" is a value between 000 and 255.
Press the ENTER button to select the Total Dimming effect.
2. Use the UP or DOWN buttons to adjust your dimming effect between 000-255 then press the
ENTER button to select your desired setting.
Other Program Select Mode: There are five additional programs to choose from (Random Program,
Color Jumper, Color Gradient, Color Pulse, and Sound Sensitivity).
1. Press the MENU button to cycle through the different programs in the main menu. Press the
ENTER button to select the program. The programs are denoted as follows on the screen:
•
Random Program: "Rand"
•
Color Jumper: "CHAG"
•
Color Gradient: "PuSE"
•
Color Pulse: "CHAS"
•
Sound Sensitivity: "Soun"
2. The screen will then display either "SPEd" or "SEnS" depending on which program is selected.
Press the ENTER button again to accept.
3. Use the UP and DOWN buttons to adjust the speed or sensitivity level of the selected program
from 000-255, with 000 being the slowest/least sensitive and 255 being the fastest/most sensi-
tive. Press the ENTER button again to accept. Do NOT press MENU again to return to the main
system menu, as this will take the panel out of the program mode you have just selected.
SYSTEM MENU
22
Advertisement
Table of Contents
