Dipswitch Settings................14 Warranty..................15 Specifications................16 DOCUMENT VERSION Please check www.adj.com for the latest revision/update of this guide. Document Date Notes Version User Instructions 12/09/19 UC IR Control Added ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 2...
• T his unit is intended for indoor use only, use of this product that may be operated in three modes; DMX-512, Stand-Alone, or Master/ o utdoors voids all warranties Slave. The MB DMX II allows you to control the operation of a mirror • D uring long periods of non-use, disconnect the unit’s main power ball motor as well as lights via DMX operation. You may also link sev- • A lways mount this unit in safe and stable matter eral MB DMX II motors together to obtain universal speed and rotation.
Data Cable (DMX Cable) Requirements (For DMX and Master/ to service not displaying a R.A. number on the outside of the pack- Slave Operation): age will be returned to the shipper. The MB DMX II can be controlled via DMX-512 protocol. The ADJ MB DMX II is a two channel DMX unit. The DMX address is set on the side panel using the dipswitches. Your unit and your DMX controller require a standard 3-pin XLR connector for data input and data output (Figure 1). If you are making your own cables, be sure to...
DATA -). This unit is inserted in the female XLR connector of the last DMX traits. unit in your daisy chain to terminate the line. Using a cable terminator 1. To activate the Stand-Alone mode, locate the dipswitches on the (ADJ part number ZDMX/T) will decrease the possibilities of erratic side of the unit and flip dipswitch 10 to the “on” position. behavior. 2. Follow the dipswitch chart on page 14 to select a preset speed Termination reduces signal errors and avoids signal transmission problems and to control mirror ball rotation direction. DMX512 IN and interference. It is always advisable...
Sound On is slowest strobe speed, 6. For help operating in DMX operation consult the manual included Show 0 is medium speed, and Sound Off is the fastest speed. with your DMX controller. Sound On - 1Hz 7. For longer cable runs (more than a 100 feet) use a terminator on Show 0 - 3.5Hz the last fixture. Sound Off - 7Hz ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 9 ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 10...
This unit will only blackout the fixtures and will not change or select different programs. 30 Foot Extension Cable Blackout Indicator Blackout Button Discontinued October 2016 ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 11 ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 12...
The optional MINI/C may be used during Master/Slave operation to stop motor rotation and to blackout the electrical sockets ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 13 ADJ Products, LLC - www.adj.com - MB DMX II™ Instruction Manual Page 14...
ADJ Products, LLC Service Department at 800-322-6337. Send the pro- Duty Cycle: None duct only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC DMX: 2 Channels will pay return shipping charges only to a designated point within the United States.
Need help?
Do you have a question about the MB DMX II and is the answer not in the manual?
Questions and answers