C O N T E N T S General Information Limited Warranty (USA Only) Safety Guidelines Maintenance Guidelines Overview Installation Instructions Trouble Shooting Tips Frequently Asked Questions Technical Specifications and Optional Accessories...
Please do not discard the shipping carton in the trash. Please recycle whenever possible. CUSTOMER SUPPORT ADJ provides a customer support line, to provide set up help and to answer any question should you encounter problems during your set up or initial operation. You may also visit us on the web at www.adj.com...
Page 5
ADJ Products, LLC be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product. This warranty is the only written warranty applicable to ADJ Products, LLC Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.
To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual. ADJ PRODUCTS LLC is not responsible for injury and/or damages resulting from the misuse of these devices due to the disregard of the information printed in this manual. Only qualified and/or certified personnel should perform installation of these devices and only the original rigging parts included with these devices should be used for installation.
S A F E T Y I N S T R U C T I O N S A N D G U I D E L I N E S DO NOT position devices close to any FLAMMABLE MATERIALS while operating. DO NOT attempt installation and/or operation of devices without knowledge how to do so.
Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts inside these devices, please refer all other service issues to an authorized ADJ service technician. Should you need any spare parts, please order genuine parts from your local ADJ dealer.
O V E R V I E W 1. M-101HD Mirror Ball Motor (included) 2. M-101HD Mirror Ball Motor Axel Shaft (included) 3. O-Shaped Screw Gate Locking Carabineer (1x included) 4. Mirror Ball Chain (not included) 5. Mirror Ball Eyelet (included) 6.
I N S T A L L A T I O N I N S T R U C T I O N S FLAMMABLE MATERIAL WARNING Keep devices minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotechnics. ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and/or installations.
Page 11
I N S T A L L A T I O N [continued] CLAMP / TRUSS MOUNTING Motor can be mounted to truss using (2) ADJ clamps (not included) attached to the (2) larger mounting holes on each side of the motor.
Page 12
ATTACHING MIRROR BALL TO MOTOR Attach mirror ball to motor axle using included carabineer (make sure to close carabiner!). SAFETY CABLE ATTACHMENT POINTS If the mirror ball includes one, attach a safety cable to the mirror ball eyelet and the motor safety eyelet (safety cable sold separately).
Page 13
MOUNTING LIGHT SOURCE Light can be mounted onto a truss using an ADJ (not included) clamp, or a flat surface using the mounting yoke holes along the inside. Ceiling surface must support 10 times the total weight of the light.
3. Confirm the AC power cord from the motor is not damaged or cut. 4. Confirm the eyelet attached to the mirror ball is not damaged or loose. 5. If none of these solutions work, please contact ADJ Customer Service. Motor Makes Noise When Rotating 1.
F R E Q U E N T L Y A S K E D Q U E S T I O N S Listed below are a few answers to common questions users may have. 1. How large of a mirror ball can be attached to the M-101HD motor? You can connect up to a 20-inch (51cm) mirror ball.
T E C H N I C A L S P E C I F I C A T I O N S M-101HD HEAVY DUTY PROFESSIONAL MIRROR BALL MOTOR INDOOR USE ONLY FOR USE WITH UP TO 20-INCH (51cm) MIRROR BALL MAX LOAD 22 lbs.
Page 17
5.25” [133mm] 3.5” [89mm] 2.0” [50mm] Æ.25 [6.4mm] Æ7.50” [190mm] Æ.375” [9.5mm] 4.75” [120mm] 6.75” [171.5mm] Specifications subject to change without any prior written notice.