Frequently Asked Questions - ADJ M-101HD User Manual

F R E Q U E N T L Y A S K E D Q U E S T I O N S
Listed below are a few answers to common questions users may have.
1. How large of a mirror ball can be attached to the M-101HD motor?
You can connect up to a 20-inch (51cm) mirror ball.
2. What is the rotation speed, and can it be adjusted?
The maximum rotation speed 0.8 - 1 RPM (rotations per minute) and cannot be adjusted. The actual
rotation speed may vary depending on the actual weight of the mirror ball attached.
3. Can the M-101HD be mounted onto to a ceiling?
Yes, it can be installed onto a flat ceiling surface that can support 10 times the combined total
weight of the motor and the attached mirror ball. Careful planning must be used when calculating
the combined weight and determining if the flat ceiling surface can support the weight of the motor
and mirror ball. PLEASE CONSULT A PROFESSIONAL FOR CEILING INSTALLATION GUIDANCE!
4. Can the M-101HD be installed to truss?
Yes, it can be installed to truss using (2) professional truss clamps (not included). First attach the (2)
clamps to the motor securely using hardware included with the clamps. Then attach the motor to
truss making sure the motor is level horizontally with the axel shaft facing down toward the ground.
5. Can the M-101HD be connected to a dimmer pack?
NO; however, the motor can be connected to an ON/OFF switch/replay pack.
6. Can the PL-1000 be connected to a dimmer pack?
YES, and it can also be connected to an ON/OFF switch/replay pack.
15