C O N T E N T S General Information Limited Warranty (USA Only) Safety Guidelines Maintenance Guidelines Overview Installation Instructions Trouble Shooting Tips Frequently Asked Questions Technical Specifications and Optional Accessories...
You may obtain a R.A. number by contacting customer support. CUSTOMER SUPPORT Contact ADJ Service for any product related service and support needs. Please visit forums.adj.com with questions, comments or suggestions.
Page 5
ADJ Products, LLC be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.
To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual. ADJ PRODUCTS LLC is not responsible for injury and/or damages resulting from the misuse of these devices due to the disregard of the information printed in this manual. Only qualified and/or certified personnel should perform installation of these devices and only the original rigging parts included with these devices should be used for installation.
S A F E T Y I N S T R U C T I O N S A N D G U I D E L I N E S DO NOT position devices close to any FLAMMABLE MATERIALS while operating. DO NOT attempt installation and/or operation of devices without knowledge how to do so.
Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts inside these devices, please refer all other service issues to an authorized ADJ service technician. Please refer to the following points during routine inspections: Be sure all screws and fasteners are securely tightened at all times.
O V E R V I E W INCLUDED ITEMS (1) 12” Mirror Ball (M-1212) SAMPLE INSTALLATION USING A MIRROR BALL MOTOR AND CHAIN: 1. Mirror Ball Motor (not included) 2. Mirror Ball Motor Axel Shaft (not included) 3. Mounting Ring (not included) 4.
I N S T A L L A T I O N I N S T R U C T I O N S FLAMMABLE MATERIAL WARNING Keep devices minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotechnics. ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and/or installations.
Page 11
CEILING AND MIRROR BALL MOTOR MOUNTING The M-1212 Mirror Ball can be mounted to a mirror ball motor or a variety of other mounting methods. Prior to mounting, ensure that the mounting method and/or mirror ball motor are capable of supporting the weight of the mirror ball, motor, as well as any clamps, cables or any other installation accessories.
Page 12
Attach mirror ball to fixture or motor axle using carabineer (not included) (make sure to close carabineer!). If installing to a mirror ball motor, power ON motor and confirm mirror ball rotation functions well. LIGHTING THE MIRROR BALL Experiment with different angles and distances to achieve desired result. For lighting fixture options, please visit www.adj.com.
3. Confirm the AC power cord from the motor is not damaged or cut. 4. Confirm the eyelet attached to the mirror ball is not damaged or loose. 5. If none of these solutions work, please contact ADJ Customer Service. Motor Makes Noise When Rotating 1.
INSTALLATION GUIDANCE! 2. What mirror ball motor works with the M-1212? The ADJ M-HDAC8 3 R.P.M. mirror ball motor will offer you the needed support for mirror balls up to 16 inches in size. 3. Is a light included with the M-1212? No.
T E C H N I C A L S P E C I F I C A T I O N S 12” MIRROR BALL INDOOR USE ONLY DIMENSIONS Diameter: 12” (40 cm) Weight: 4.93 lbs. / (2.24 kg) Specifications subject to change without any prior written notice.