Change Of Axis-3 Working Envelope - Toshiba TVL Series Instruction Manual

3.3.3.

Change of Axis-3 Working Envelope

<1> Before shipment of the TVL 500/TVL700, the soft limit and mechanical stopper
are set in such a way that the stroke of the axis 3 is kept within the range of Table
3.3.
Operating direction
+
-
The settings of the operating range when the TVL500 robot is shipped from the factory
are shown in Fig. 3.19 and those of the TVL700 robot in Fig. 3.20.
To change the operating range of the second axis, the customer needs to prepare a new
mechanical stopper.
If the operating range is changed, it is also necessary to changer the software limits. For
details about changing the software limit, see the "Instruction Manual: User Parameters"
provided as a separate volume.
Table 3.3 Strokes of the third axis at factory shipment
TVL500
+150.5
-0.5
TRANSPORTATION AND INSTALLATION MANUAL
TVL700
+166
-0.5
49