Advantech ADAM 4000 Series User Manual page 94

Table 4.16: ADAM-4056SO Command Table
Command Syntax Command Name
%AANNTTCCFF
#AABB(data)
$AA2
$AA5
$AA6
$AAF
$AAM
$AAX0TTTTDD
$AAX1
$AAX2
$AAE0
$AAXnnnn
$AAY
ADAM-4000 Series User Manual
Command Description
Sets the address, baud rate, and/or
Configuration checksum status to a digital I/O
module
Writes specified values to either a
Digital Data Out single channel or all channels simul-
taneously
Returns the configuration parame-
Configuration Status
ters of a specified digital I/O module
Indicates whether a specified digital
Reset Status I/O module was reset after the last
time that $AA5 command was issued
Returns the values of the digital I/O
Digital Data In
channel in the addressed module
Read Firmware Return the firmware version code
Version from the specified digital I/O module
Return the module name from the
Read Module Name
specified digital I/O module
Force the DO channels to safety
Write Safety Value status when communication is time-
out and over pre-defined period.
Read the time-out setting and pre-
Read Safety Value
defined safety status of DO channels.
Requests the Safety Flag of the
addressed digital I/O module to see
Read Safety Flag whether the safety value has been
executed since Write Safety Value
command was set.
Read and Clear Over Read the Over Current Status Flag
Current Status Flag and Clear the Flag simultaneously
Set communication WDT cycle time
Watchdog Timer from 0000 ~ 9999 (unit: 0.1 second. if
Setting value is 0000, the communication
WDT function will be disable)
Read Watchdog Read the cycle time setting of
Timer Setting communication WDT
82
Page No.
7-4
7-8
7-14
7-16
7-6
7-18
7-19
7-21
7-22
7-23
7-24
7-27
7-28