Advantech ADAM 4000 Series User Manual page 82

Table 4.1: ADAM-4015 Command Table
$AAXnnnn
$AAY
$AAS0
$AAS0
Table 4.2: ADAM-4017 Command Table
Command Syntax Command Name
%AANNTTCCFF
$AA2
$AAF
$AAM
#AA
#AAN
$AA5VV
$AA6
$AA0
$AA1
ADAM-4000 Series User Manual
Set communication WDT cycle time
Watchdog Timer from 0000 ~ 9999 (unit: 0.1 second. if
Setting value is 0000, the communication
WDT function will be disable)
Read Watchdog Read the cycle time setting of com-
Timer Setting munication WDT
Internal self-calibration for offset and
Internal Calibration
gain errors
Reload factory default calibrating
Reload default cali-
parameter to overwrite current cali-
brating parameter
brating parameter
Command Description
Sets the address, input range, baud
rate, data format, checksum status,
Configuration
and/or integration time for a specified
analog input module
Return the configuration parameters
Configuration Status
for the specified analog input module
Return the firmware version code
Read Firmware
from the specified analog input mod-
Version
ule
Return the module name from the
Read Module Name
specified analog input module
Return the input values from all chan-
Read Analog Input nels of the specified analog input
module
Return the input value from channels
Read Analog Input
number N of the specified analog
from Channel N
input module
Enable/Disable
Enable or disable the individual chan-
Channels for Multi-
nels in an analog module
plexing
Get the enable/disable status of all
Read Channel Status
channels in an analog module
Calibrates an analog input module to
Span Calibration
correct for gain errors
Calibrates an analog input module to
Offset Calibration
correct for offset errors
70
5-31
5-32
5-33
5-34
Page No.
5-4
5-10
5-12
5-13
5-14
5-16
5-17
5-18
5-19
5-20