Operation; Press Process Work Steps - Gechter HKPE Series Translation Of The Original Operating Manual

6.2

Operation

Crushing and hand injuries
Ensure that no body parts enter into the tool area during opera-
tion!
Risk of injury from material dust!
Dust that makes its way into the airways or eyes when pro-
cessing metal powder or similar may lead to injuries.
Always use an exhaust system during powder processing.
Never work without a respirator mask during powder processing.
Never work without a protective goggles during powder pro-
cessing.
6.2.1

Press process work steps

Due to the number of application possibilities of the hand toggle
press, detailed work steps cannot be described. The respective
work steps must be specified by the operator.
The following work steps describe a simplified pressing process in order to il-
lustrate the general pressing process:

Take the workpiece from the stock.

Place the workpiece in the press tool.

Execute the approach stroke of the upper die with the hand lever.

Remove the workpiece from the pressing tool and place to the side.
–
Hand toggle presses Translation of the original operating manual
Commissioning / Operation
29
6