Installation; Transport Process - Gechter HKPE Series Translation Of The Original Operating Manual

4.1

Transport process

The press is delivered on a pallet. This must remain under
the press during transport to the site of installation in order to avoid any
tipping or bumping during transport.
Example representation









–
Hand toggle presses Translation of the original operating manual

Installation

Bring the transport crate to the final site of installation with suitable
transport equipment (lift truck / forklift).
Wear appropriate protective clothing during transport work!
For transport, only use technically flawless and functional hoisting gear
with sufficient load-bearing capacities!
Lift the press at the marked attachment points (3)!
Ensure that the load-bearing capacity of the hoisting gear as well as the
load receiving and transport equipment correspond to the loads specified
for the press!
For larger presses, have trained transport personnel carry out the
transport!
Remove the transport straps (1).
Remove the pallet packaging (2).
Remove the safety screws.
11
4