Gechter HKPE Series Translation Of The Original Operating Manual page 42

8
Setup and accessories
T-shaped sliding blocks are available to clamp the lower die.
For 2.5 - 8/12 HKPV 1x DIN 650, M8x10 middle symmetrical.
For 8/16 HKPV 2x DIN 650, M8x10 middle symmetrical.
For 50 HKP 2x DIN 650, M8x12 middle symmetrical.

Fasten the tool to the press table.
Press table
–
Hand toggle presses Translation of the original operating manual
37