10.1
Technical Support
Please refer to the "Identification" chapter for how to contact the
customer service of Gechter GmbH!
10.1.1
Fault table
Error description
The press sled moves
laterally or jams
The hand lever only
moves upwards with dif-
ficulty
–
Hand toggle presses
Translation of the original operating manual
Faults
Cause
The press sled has
too much or too little
play
Return spring broken
The press sled does
not have enough
play
49
Remedial measure
Adjust the adjust-
ment gib
Install a new return
spring
Adjust the adjust-
ment gib
10
Personnel
Technically
trained per-
sonnel
Technically
trained per-
sonnel
Technically
trained per-
sonnel