Setup And Function; Standard Versions - Gechter HKPE Series Translation Of The Original Operating Manual

5.

Setup and function

5.1 Description
The hand toggle press is used for riveting, punching, bending, embossing, cut-
ting, pressing and joining work. A constant work performance of the operator
can be assumed due to the low physical force input.
The press is suitable as a work station both in a sitting and standing position.
It is primarily fastened to an existing workbench or a sturdy base frame.
The hand toggle press may only be used for pressing, joining, assembly, rivet-
ing, punching, bending, embossing and cutting work as well as work with suffi-
ciently insulated heated tools. The device is only suitable for processing metal,
cardboard, plastic, rubber, leather and metal powder.
5.2

Standard versions

A modified stand version may be required in certain circumstances for the re-
spective application case. The following other versions are available for the
hand lever press with air assistance.
Stands with a greater overhang
height
–
Hand toggle presses Translation of the original operating manual
Setup and function
15
Stands with a larger installation
5