Remove The Clamped Piece (From 5 Hkpv) - Gechter HKPE Series Translation Of The Original Operating Manual

8.1.2

Remove the clamped piece (from 5 HKPV)


Unscrew the pin retaining screw in the clamping piece with an Allen key.

Unscrew the tensioning screws with an Allen key.

Remove the clamping piece forward.
Remove the clamping piece
1
2
Observe the installation position (marking) so that the clamping
piece can be reinstalled without contorting it.
–
Hand toggle presses Translation of the original operating manual
Setup and accessories
Clamping piece
Clamping screw
1
2
3
3
Pin retaining screw
34
8