Table of Contents
Advertisement
4.2) Bowl assembly [AMK30, AMK40]
Step 1
Mount the bowl assembly at the position where the mating
mark of the joint and bowl assembly meet.
Body
Joint
Assemble
Align the mating mark
Mating mark of the joint
Bowl assembly side
Mating mark
Lock button
Bowl Assembly
-22-
Step 2
While the lock button is held down, rotate the bowl
assembly so that the lock button meets the groove
of the joint (approx. 30
Rotate for 30
degrees
Caution
Make sure that the lock
button is locked to the
grove of the product
before pressurizing it.
degrees
).
Bowl Assembly
Advertisement
Table of Contents
Need help?
Do you have a question about the AMK20 Series and is the answer not in the manual?
Questions and answers