Pull (Hinge) Side; Push (Stop) Side - Assa Abloy Norton 5700P Series Installation Instructions Manual

5700P Series Power Operator
PULL Template
Right hand door opening to 110° shown.
PULL side application is shown.
PUSH side mounting template is provided on page 20.
• Do not scale drawing.
• Right hand door shown.
• All dimensions given in inches (mm).
• Maximum frame reveal is 1/8" (3mm) for this application.
Notes:
1. Thickness recommended for reinforcements in hollow metal
doors and frames is charted on page 4.
2. This template information based upon use of 5" (127mm)
maximum width butt hinges or 3/4" offset pivots. A separate
template is required for other conditions.
3. Shaded area = 15" (381mm) maximum distance for placement of
power input receptacle.
4. Door must be visible by person operating activation switch(es).
Copyright © 2016, 2019-2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9357-0009-020 Rev 7 01/20
Approved 2020-01-27
Push Side
Pull Side
Right Hand Left Hand
PULL PULL
Door Opening Angle Dim A
Up to 110° 15-1/2" (394mm)
111° to 180° 13-1/4" (337mm)
19