Assa Abloy Norton 5700P Series Installation And Instruction Manual

ASSA ABLOY
6
7
8
Item No. Description
1 Back plate
2 Door Closer (1601LAP)
3 Motor Assembly (5700M)
4 Inverter (5700IN)
5 Cover (5700CVR)
6 On/Off switch
7 Circuit Breaker
8 120VAC Electrical Connections
9 Activation Inputs
10 Door Open/Closed Position Magnets
11 Optional RF Receiver
12 Power Supply - 1.1A 24V
If local code requires unit to be hard wired instead of using
·
the plug-in type power supply cord supplied with this version
of the unit, the unit MUST be returned to the manufacturer
and replaced with a unit designed to be hard wired.
To reduce the risk of shock, this operator has a grounding
·
type plug, that has a third (grounding) pin. This plug will only
fit into a grounding type outlet. If the plug does not fit into the
outlet, contact a qualified electrician to install the proper
outlet. Do not change the plug in any way.
Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.
Copyright © 2016 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
3
2
10
12
9
!
with Optional Plug-in Power Input
Installation and Instruction Manual
4
1
Tools required:
• 1/8" allen wrench (included)
• Flat blade screwdriver (potentiometer & terminal size)
• Screwdriver (Phillips size 2)
• Tape ruler
• Power drill and set of drill bits
• Center punch
• Wire stripper
• #7 drill 1/4-20 tap (metal frame install)
WARNINGS
Always disconnect the main power to the operator prior to
·
servicing or cleaning.
This operator is for indoor use only.
·
To reduce the risk of injury or person, use the operator only
·
with Pedestrian Swing doors.
120VAC power supplied to the operator must be a dedicated
·
circuit from the main circuit breaker panel and must NOT be
connected into any building lighting system that operates
flourescent lights.
Maximum door size: 48 in (1219mm) wide x 250 lb (113.4kg).
·
5700P Series Low Energy
Power Operator
80-9357-0009-020 (Rev 5)
11
5
80-9357-0009-020 (Rev 5)