Assa Abloy Norton 5700P Series Installation Instructions Manual page 20

5700P Series Power Operator
PUSH Template
Left hand door opening to 110° shown.
PUSH side application is shown.
PULL side mounting template is provided on page 19.
• Do not scale drawing.
• Left hand door shown.
• All dimensions given in inches (mm).
• Frame reveal is 2-5/8" - 6-3/4" (67-171mm) for this application.
Notes:
1. Thickness recommended for reinforcements in hollow metal
doors and frames is charted on page 4.
2. This template information based upon use of 5" (127mm)
maximum width butt hinges or 3/4" (19mm) offset pivots. A
separate template is required for other conditions.
3. Shaded area = 15" (381mm) maximum distance for placement of
power input receptacle.
4. Door must be visible by person operating activation switch(es).
Copyright © 2016, 2019-2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9357-0009-020 Rev 7 01/20
Approved 2020-01-27
Door Opening Angle Dim A
Up to 110° 12" (305mm)
111° to 170° 9-1/2" (241mm)
Dim B
15-3/4" (400mm)
13-1/4" (337mm)
20