Assa Abloy NORTON RIXSON 5700P Series Installation Instructions Manual

5700P Series Power Operator
with Original Plug-in Power Input
PUSH and PULL Side
Installation Instructions
WARNING
This product can expose you to lead which is known to the
state of California to cause cancer and birth defects or other
reproductive harm. For more information go to:
www.P65warnings.ca.gov.
Door Closer
(1601LAP)
On/Off
Switch
120VAC Electrical
Circuit
Connections
Breaker
Included with 5710 and 5740
Slide Arm Tube
Tools Needed
#7 1/4-20 3/8 3/16
Drill
#2
Screwdrivers Pencil
Strippers
The table below provides a list of documents associated with this product. These documents are available for download
from www.nortonrixson.com. If additional information or assistance is needed, contact Technical Product Support.
5700 Series Push to Pull Application Conversion Instruction Document
5700P Series Push and Pull Template
Copyright © 2016, 2019-2020, 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9357-0009-020 Rev 8 11/23
Motor Assembly
Backplate
(5700M)
Power
Supply
Door Open/Closed
1.1A 24V
Position Magnets
Activation
Inputs
Slide Arm
Rod
9/64" Hex
Drive Socket
Screw
Slide Track Assembly
Buffer Stop
Supplied Fasteners
Safety Glasses
Tape
Measure
Wire Punch
Document Title
Approved 2024-02-13
Pour la version francaise voir NortonRixson.com.
READ AND FOLLOW ALL INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
Inverter
Optional RF Receiver
(5700IN)
Included with 5730 and 5740
Adjusting Tube
Slider
Main Arm/Slide Unit
Assembly
1/8"
Conduit
Hex Wrench
Bracket
Cover
(5700CVR)
Connecting Link
Bushing Assembly
Shoe/Adjusting Rod
Assembly
Main Arm
3x Track 1x 6x
2x Arm Arm Operator
1/4-20 x 2" 1/4-20 x 1/2" #14 x 1-1/2"
Document Number
80-8357-0140-020
80-7357-0002-020
Shoe
Forearm Screw
OR
6x
Operator
1/4-20 x 1"