Mitsubishi Electric MELSERVO-J5 Series User Manual page 430

■Temporary stop/restart/remaining distance clear
Transmitting the following command, data No., and data during positioning operation will decelerate the servo motor to a stop.
Command Data No.
[A] [0] [4] [1]
Transmitting the following command, data No., and data during a temporary stop will restart the servo motor.
Command Data No.
[A] [0] [4] [1]
*1 "_" indicates a blank.
Transmitting the following command, data No., and data during a temporary stop will stop positioning operation and erase the
remaining travel distance.
Command Data No.
[A] [0] [4] [1]
*1 "_" indicates a blank.
8 COMMUNICATION FUNCTION (MITSUBISHI ELECTRIC AC SERVO PROTOCOL) [A]
428
8.5 Detailed explanations of commands
Data
STOP
*1
Data
GO _ _
*1
Data
CLR _