Maxxus 4.2 R Installation & Operating Manual page 7

Step 3: Assembling the Handlebar Shaft
Connect the connectors of the three cables coming out of the bottom of the handlebar shaft (D) to the connec-
tors of the three cables protruding from the base frame (A).
CAUTION:
From the three cables, two have identical connectors. As these are the hand pulse sensor cables, it is not pos-
sible to mix the cables up. Now put the handlebar shaft (D) onto the mount of the base frame (A) and fix it with
four hexagonal bolts M8x25 (2)
CAUTION:
Make sure you do not crush or damage the cables when mounting and fixing
the handlebar shaft (D)
Pulse Sensor Cable
Pulse Sensor Cable
Step 4: Assembling the Handlebar Shaft Cover
Put both handlebar shaft covers (L) on the right and left sides of the joint between the handlebar shaft (D) and
the base frame (A). Fix these with two self-tapping screws M5x16 (4).
L
2
Cockpit Cable
Cockpit Cable
D
A
7
Assembly
D
A
4
ENG