Step 11: Assembling The Seat - Maxxus 4.2 R Installation & Operating Manual

Assembly

Step 11: Assembling the Seat

Fix the seat (I) onto the base plate of the handles (H) using four hexagon socket screws M8x25 (12). Then
connect the two hand pulse cables protruding out of the handles (H) with the connector on the spiral cable – it is
not possible to connect these wrongly. Now fix the handles (H) to the sliding carriage using four hexagon socket
screws M8x12 (3) and four washers M8 (10).
I
H
12
10
3
10