Display
Operation
Press the AUTO/MANUAL key once and the
PH60 will display 'SEt' and the current
control mode.
Press and hold the SET key or wait for 8
seconds to return to NORMAL mode
without making any changes.
Press the AUTO/MANUAL key again (or the
SELECT key) to change the control mode.
Use the AUTO/MANUAL key to scroll
through the control modes (Auto
Manual Comfort Manual Econ
Manual Party Manual Holiday
Manual Frost Manual Off Auto).
Press the SET key or wait for 8 seconds to
return to NORMAL mode and the PH60
will start to operate in the new mode.
When choosing the control mode, you can
use the + or – keys to change the
set temperature setting.
You cannot adjust the set temperature
if 'Off' mode has been selected.
Pressing the + or – key in NORMAL mode will
allow you to review the current set
temperature. 'SEt' and the set temperature
will be displayed until the key is released.
If the + or – key is held for more than
two seconds, the display will flash once
and change to setting mode.
PH60 INSTRUCTION MANUAL
15