8.6.5 Display floor temp
Display floor temperature is a function which is available only when thermostat works with external floor temperature sensor.
To show/hide floor temperature value please follow steps below:
1
Press
button to enter the
main menu.
4
Select SHOW or HIDE using
buttons. Confirm selection by
8.6.6 Standby temp setpoint
There are two standby temperature setpoints - for heating and for cooling mode. Standby setpoint range for heating mode is from
5 ° C to 35 ° C. Standby setpoint range for cooling mode is from 5 ° C to 40 ° C. To set it on please follow steps below:
NOTE: If paired with TRV radiator heads or RX10RF receiver, then standby for cooling is not available.
1
Press
button to enter the
main menu.
4
Select for heating or cooling option.
2
Go to the user settings.
5
Floor temperature value is
and
displayed with one degree
button.
accuracy.
2
Go to the user settings.
5
3
Choose display floor temp option.
3
Choose standby temp setpoint option.
Set temperature setpoint by
or
buttons. Confirm by
button.
59