Assembling And Connecting The Device; Maintenance Schedule; Performing A Software Update - Sartorius Cubis MCA125P Series Operating Instructions Manual

Cleaning and Maintenance
Interval
Monthly to every 2 years, depending on
the operating conditions
78 Cubis ® MCA Operating Instructions
Wipe the device housing with a damp cloth . For more severe contamination,
t
use a mild soap solution .
If this relates to a device with an analytical draft shield or flat glass draft shield:
t
Wipe the weighing chamber with a damp cloth . For more severe contamination,
use a mild soap solution .
Tip
We recommend cleaning the weighing pan on a regular basis, e .g . weekly . Do not
allow deposits to form on the weighing pan .
Protective oil may be applied to the weighing pan for additional protection . The
protective oil must be suitable for stainless steel and titanium .
9.4

Assembling and Connecting the Device

Procedure
Re-insert all components into the device (for insertion, see Chapter "5 .7 Installing
t
a Device with an Analytical Draft Shield or Flat Glass Draft Shield", page 42,
Chapter "5 .8 Installing a Device with a Frame Draft Shield", page 44) .
Re-connect the device to the power supply (see Chapter "6 .2 Connecting the
t
Power Supply", page 47) .
9.5

Maintenance Schedule

Component Action
Device Contact Sartorius Service
9.6

Performing a Software Update

A software update can be installed from a USB mass storage device using the
device's USB-A connection . A software update can extend or change functionality .
Requirements
− The device is switched on .
− The software update is saved on a USB mass storage device .
Procedure
Download the software update from the Sartorius website onto the USB mass
t
storage device .
If this relates to a zip file: Unzip the software update on the stick . The files must
t
be saved at root level . The files must not be set aside in a folder .
Insert the USB mass storage device with the software update into one of the
t
device's USB-A connection sockets .
Select the "Update Firmware" menu entry in the "Settings / Device Maintenance"
t
menu .
Select "USB stick" as the connector .
t
The software update takes approx . 3 minutes .
y
Once the software update is complete: The software version number is updated in
y
the login display .
Chapter, page
17, 100