Device Id" Menu; Parameters In The "Device Settings / Draft Shield" Menu; Motorized Draft Shield); Parameters In The "Device Settings / Ionizer" Menu (Only For Devices With An Ionizer) - Sartorius Cubis MCA125P Series Operating Instructions Manual

Parameter Settings
Starting point of User input
operating range
Mark weight values Off*
< minUSP as invalid
On
* Factory setting
7.5.18 Parameters in the "Device Settings / Device ID" Menu
Parameter Settings
Device ID 1 User input
Device ID 2 User input
7.5.19 Parameters in the "Device Settings / Draft Shield" Menu (Only for Devices with a Motorized Draft Shield)
Parameter Settings
Left/right palm key Off, no function
Same function
Separate function*
* Factory setting

7.5.20 Parameters in the "Device Settings / Ionizer" Menu (Only for Devices with an Ionizer)

Parameter Settings
Activation ionizer Off, no function*
Activate manually by
pressing key
Automatically on, when
draft shield closes
Intensity Weak
Medium*
Strong
Start-up duration User input, 1–60 seconds
* Factory setting
Explanation
If this extension has been activated in the QAPP center: Define the starting
point value .
If this extension has been activated in the QAPP center: Deactivates the
identification of weight values that are less than the minimum weight .
If this extension has been activated in the QAPP center: Activates the
identification of weight values that are less than the minimum weight .
Explanation
Saves the entered device ID .
Saves the entered device ID .
Explanation
Deactivates the function for both palm-operated keys .
Assigns the same function to the palm-operated keys . The two palm-
operated keys cannot be assigned functions independently of each other .
Assigns separate functions to the palm-operated keys . The two palm-
operated keys can be assigned functions independently of each other .
Explanation
Deactivates the ionizer .
The [Ionizer] button starts an ionization process .
If the draft shield is closed: The ionization process starts automatically .
Sets the intensity of the ionization process to "weak" .
Sets the intensity of the ionization process to "medium" .
Sets the intensity of the ionization process to "strong" .
Sets the duration of the ionization process (factory setting: 8 seconds) .
System Settings
Cubis ® MCA Operating Instructions 63