Topmix2.Touch Assembly Procedures; Connecting The Cables To The Topmix2.Touch - Sartorius TopMix2.Touch User Manual

Hide thumbs Also See for TopMix2.Touch:

Table of Contents

TOPMIX2.TOUCH ASSEMBLY PROCEDURES

The TopMix2.Touch assembly procedures consist of connecting the cables to the

TopMix2.Touch, converter box and your computer. Many of the components have

been identified with labels to assist you with these procedures. Below is a

diagram of how the TopMix2.Touch, PMA.Evolution scale and its components are

connected. The following sections are step-by-step procedures on how to make

these connections.

Note: If you are not using a PMA.Evolution scale, your configuration will be

different. Please call ColorNet Support at 800-634-2614.

To help conserve space, you can mount your TopMix2.Touch on a wall or another

stable area.

1. Locate the TopMix2.Touch control unit, PMA.Evolution scale and the blue

20-meter cable.

2. Select a stable location inside your mixing area for the TopMix2.Touch and the

PMA.Evolution.

3. Place the control unit in the selected location in your mixing area. You will

need to turn the scale during the assembly so make sure that you have

enough room.

Table of Contents