Table of Contents
Advertisement
Installing a Plywood Base
A plywood base is recommended when installing the device on a wall that
has wooden studs. Refer to "Plywood Base for a Wall with Wooden Studs"
on page 81. Consult a qualified building contractor for installation
instructions for the plywood base. The installation guidelines are listed
here:
Use a stud finder to identify the middle of studs and hot electrical
wiring in the wall.
Attach the base to two wall studs with a minimum of four screws.
The selected wall location for the base should provide sufficient
space from other devices or walls so that you can access the front
and back panels, and for adequate air flow for ventilation.
GS980EM Series Installation Guide
83
Advertisement
Table of Contents
