Chapter 1: Overview of the GS980EM/10H Switch
Fault and Power LEDs
Switch LEDs
32
The Fault and Power LEDs are shown in Figure 6.
Figure 6. Fault and Power LEDs
Note
The USB LED is described in "USB Port" on page 30.
The states of the LEDs are described in Table 9.
Table 9. Fault and Power LEDS
State
Fault LED
Off
Flashing Red
Power LED
Solid Green
Off
Fault, Power and USB LEDs
The switch is operating normally or is not
powered on.
The power supply or switch is
experiencing a problem, such as
overheating. To troubleshoot the problem,
view the log messages by displaying the
system log file.
The power supply and switch are
operating normally.
The switch is powered off or the input
power is outside the normal operating
range.
Description